AB74/090226E/SP-P/F/AO/
Volkmann CarpetTwister / CarpetCabler
Quantity: 1, Year: End of 2017, Type: VTS-05-0-F / VTS-05-0-C-F, Series: 8.02
Configuration
Number of spindles: 160, Number of sections: 20, Spindle gauge: 445 mm, Balloon limiters: without, High energy saving spindle E-260
Overall dimensions
Overall length: approx. 39.77 m, Overall width: approx. 1.50 m, Overall height: approx. 2.69 m
Technological data
Material: 100% PP, Range of counts: dtex 1200 – dtex 3800
Range of twist:Up-twisting: 40 – 710 t/m, Cabling: 20 – 355 t/m, Twist direction: S + Z
Untwisted yarn (feed packages)
Package type: cylindrical feed packages
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm, Maximum outside diameter: 260 mm
Net yarn weight (approx., depending on yarn quality and package density): 5.0 kg
Twisted yarn (take-up)
Package type: cylindrical cross-wound bobbins
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm
Maximum outside diameter (approx.): 350 mm
Main drive
Driven by two short-circuit squirrel-cage induction motors (one motor per machine side) with frequency inverter
Output: 2 × 37 kW, Voltage: 220/380 V, 3 phases, 50 cycles (to be confirmed in case of order)
Full motor capacity achievable if installation height does not exceed 1000 m above sea level and ambient temperature does not exceed 40°C
Electrical control
Electrical control located in the switch gear cabinet
Reversion of twist direction from S to Z manually
Drive connected via intermediate drive onto two main drive shafts, located in front of the spindles for easy access
Spindle speed controlled by frequency inverter
Terminal displaying spindle revolution, delivery speed, turns per metre and crossing angle
Spindle drive
Individual spindle drive by endless tape with 180° contact to spindle whirl, easily exchangeable
Tape tension released when spindle is stopped
No mechanical friction between tape and drive pulley due to air cushion
Gear section
One individual gear per side
Gear drive for adjusting: Turns per metre
Take-up tension (pre-take-up), Angle of crossing of take-up packages
Special cam-driven traverse motion for high-speed take-up, including anti-patterning device
Volkmann spindle (two-for-one and cabling spindle)
Maintenance-free spindle, rigidly fixed to spindle rail, with two yarn channels:
One for two-for-one twisting, One for direct cabling
Spindle rotor statically and dynamically balanced
Reserve discs with anti-wrap collar to avoid yarn wraps around the whirl in case of ends down
Stationary protection pot held by permanent magnets with tension device
Separators between individual spindles
Machine equipped with Volcojet
Machine without balloon limiters
Take-up
Adjustable pre-take-up per machine side to vary take-up tension and package density
Adjusting range: 60%, Traversing thread guides, self-threading, fixed on traverse rod
Drive of packages by friction rollers
Pivotable balloon thread guides with enclosed ceramic eyelet, height adjustable per section
Device for producing hard and soft packages
Cradle
Swivelling, spindleless four-bar cradle with special pressuring device to ensure uniform density throughout package diameter
Centering discs for take-up tubes, simple ball-and-socket type bearing, easily exchangeable for different tube dimensions
Machine colours
Textured paint, Principal colour: Light grey NCS S 0510-R90B
Secondary colours:Traffic grey B NCS S 7502-B, Red NCS S 1080-Y90R, Anthracite grey NCS S 8502-B
Note: Machine is professionally dismantled, packed and warehoused by Volkmann technicians. with energy reduction
AB46/281225/
Swisstex Filament Yarn Technologies
Quantity: 1, Year: 2011 , Model CDDT 20-V3, 144 spindles, 500 gauge, (Made in France), Machine Type – CDDT20-V3, Alligator tensioners in creel, Electrical Diagram No : 100474B00, Power Supply: 3 Phase, Voltage: 480 V, Frequency: 60 Hz, Rated Current: 230, Air Pressure: 5 bar, Air Consumption: 1 m³/hour.
AA03/040226E/RA-R/M/BY/
Volkmann Two For one Twister VTS-05
Quantity: 2, Year: 1989/1990, 120 spindles, each side independent, with own gears and motor 45kW, 380V/3Ph/50Hz, feeding 10” assembling bobbins, Volcojet air threading, delivery 10” cylindrical tubes tubes, conical tubes also possible,
AB45/280126E/LY-Y/F/AQ/
Volkmann VTS05 C TFO
Quantity: 1, Year: 1991, 104 spindles, Alimentation 10”, Exit cone 10”, pneumatic threading, Blower, 380 V 50 HZ, Condition:Dismantled
This TWO FOR ONE machine work cotton, it is for course counts,
AA10/190126E/OS-Y/F/AQ/
Volkmann VTS 05-C Double Twisting (2×1) /Cabling
Quantity: 1, Year: 2012, mod. 05-0 type 8.02, 40 heads (20×2), feeding 10″, free ballon, can dia.350 mm., delivery 10″, pneumatic doffing and air threading device. Machine running.
AB46/281225/
Saurer Volkmann 05-0-C-F Twisting
Quantity: 2, Year: 2018, Type: 05-0-C-F, Design / Version (Bauart): 8.05.
AB46/261125/AR/
Oerlikon Saurer Cabler
AB46/261125D/PC-O/F/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 6, Year: 2013, Model 05-0-C, 144 spindles, 500 gauge, Alligator tensioners
AB46/261125D/TA-T/F/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 5, Year: 2010, Model 05-0-C, 144 spindles each, 500 gauge
Machines are still on Mill Floor
AH54/081225D/AIL-L/M/DU/
Volkmann CC-Carpet Cablers/Carpet Twister 05-0-C
Quantity: 14, Year: 6×2012 – 8×2013, Type: 05-0-C, Spindles: 13×160 – 1×120, Capacity in ton @ 2000 dtex and 85 tpm: 13×4.4 – 1×3.3, POT diameters for these twisters is 298 mm.
The electrical/mechanical parts like motors , gears , shafts , bearing , roller , etc are all working.
Those machines need to replace the pneumatic systems inside , 3/2 valve , central valve , pneumatic pipe, etc.
Stopped on Mill Floor.
AC29/281025/AS/
Complete BCF Line with Cabling & Heat Setting (VERY HIGH QUALITY)
Year: All machines 2012
Can be sold as a complete line or separately
Neumag S plus model 2012 (QUALITY IS SAME AS 2019-2020)
Mono PP and Polyamid
2 extruders/ 6 winders
One extruder for 2 winders and one for 4 winders
In excellent condition
15 tons per day
Note:
PA, Nylon Production details
spinnerets for BCF Neumag 69 and 200 for PA, Polyamide
number of spinnerets 2 set
winder speed around3000 meter /min
For PA, Polyamide, factory is manufacturing 1000 dtex yarn, approx 8 tons/day
For 900 dtex around 7,5 ton
1600 dtex around 300 tons per month
PP yarn Production details
For PP, production is 15 tons per day at 2000 dtex
And 7.5 tons at 1000 dtex
Spinnerets 140 filament and 420
4x Volkmann Twisting and Cabling VTS 05-C
160 spindles each
2x Heatset machines Superba TVP3
60 spindles each
Running in perfect conditions
AD65/211025E/YP-R/C/
Volkmann 2×1 Twister VTS05
Quantity: 2, Year: 1989/1990, 120 spindles each, Feeding & delivery 10″, Tubes 280mm, Gears for different turns/m each side, Each machine fit 2 container.
AC09/141025E/YR-R/F/BG/
Volkmann VTS 05 Two For One Twister
Quantity: 1, Year: 1985, No of Spindle: 96, Pot Dia in mm: 290, Traverse in Inch: 10, Spindle Pitch in mm: 355, Motor kW: 37, Delivery Package: Cheese, Conicity: Cylindrical, Outer Pot: Available, Spindle Drive: Tangential, Stopped.
AA10/131025E/RS-Y/M/
Volkmann VTS05 2×1 Twister
Quantity: 1, Year: 1986, Type VTS-05, 96 Spindles, Exit cone 10” – 3°30.Note: The machine is complete with software
AF45/300925E/PR-Y/C/
Saurer Carpet Cabler
Quantity: 1, Year : 2015 / Start up 2016, Type 05-0-C
Machine ihas less workinghours and is like new, Type 8.02, Number of spindles: 40
Output: 10“ (254mm) cylindric, max diameter 400mm, spindelpotdiameter 285mm, spindelpot high 300mm, Fabrics: Acryl, glass fibers, copper
AC29/190825/AS/
Volkmann VTS 05-C Twister
Quantity: 6
3x Year: 2021, 176 spindles, Pot Diameter 275mm, Travears: 250 mm, Length of machine: 43.15mm, Gap between 2 pots: 450mm.
3x Year: 2012, 176 spindles.
Very good condition.
AC94/300725/
Saurer Volkmann Carpet Cabling Twisters VTS 05-0-C
Quantity: 20, Year: 12×2006 – 2×2005 – 6×2003, 120 positions each.
AD39/130525/
Volkmann VTS05 Twisting (Not Cabling)
Quantity: 3, Year: 2×2013-1×2015, Spindle: 144, Status: Dismantled,stock
AH54/240225E/LA-P/M/DU/
Volkmann/Saurer Twisting 05
Quantity: 3, Year: 2003, spindles: 120, Capacity in ton @ 2000 dtex and 85 tpm: 3.3
2 big motors with 42 kw each
All machines are in running condition and well-maintained
AB64/300125/
Volkmann VTS05-0-C Cabling
Quantity: 5, Year: 2007, 120 Spindles each, Type: 8:00, Volkmann Cabling (machines are cabling only and dont have devices for twisting), Diameter pot: 295, H: 300.
AH54/021224/DU/
Power Heatset & Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Power Heatset
Quantity : 3
Year: 2005,2006,2010
Type: GKK 5000
Head Number: 48
Capacity in ton @ 2000 dtex and 85 tpm: 5.2
All machines are in running condition and well-maintained.
All these heat set lines are in excellent condition, excellent Gillbos winders with separate reserve accumulators for each end/position which give you the flexibility to run, and also great quality of PA6 heat set yarn. You know very well if PA6 yarn keeps/stays longer (unequal times in the oven under high temperatures, during doffing etc..) will create big issues in bulk, crimp, and printing of this yarn and it will create “lines” on the carpet design after printing… with this kind accumulators on the winder that risk is minimized.
Also, with accumulators on the Gillbos winder, there is no drop off production output during doffing time… yarn continuously passing the oven and accumulates during each doffing time etc…
Heat set yarn from Power Heat Set lines are always more bulky than heat set yarn from Superba, better carpet coverage etc…
Volkmann/Saurer “”Twisting 05″”
Quantity: 3
Year: 2003
spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
2 big motors with 42 kw each
All machines are in running condition and well-maintained
Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Quantity: 17
Year: 3×2003-12×2006-2×2005
spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
Machines Year 3×2003- 4×2006: 2 big motors with 42 kw each
Machines Year 2×2005- 8×2006: 2 big motors with 52 kw each
All machines are in running condition and well-maintained
AH54/021224/DU/
Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Quantity: 17, Year: 3×2003-12×2006-2×2005, spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
Machines Year 3×2003- 4×2006: 2 big motors with 42 kw each
Machines Year 2×2005- 8×2006: 2 big motors with 52 kw each
All machines are in running condition and well-maintained
AC29/301024E/ALY-AY/F/AS/
Volkmann VTS05-C Twisting and Cabling
Quantity: 2, Year: 2017, 170 Spindles.
AC29/151024/AS/
Neumag S Plus BCF Line & Volkmann Cabling & Superba Heatset
AC29/151024E/ASLI/M/AS/
1X Neumag S Plus, BCF line:
Year: 2017
""Mono Color & Tri Color""
Polyester and polypropylene
6 extruders
6 winders
6 dosing
It is a high quality machine.
15 tons
NOTE: Machine has 6 extruders, each has 2.5 tons capacity at 2000 dtex
Therefore production capacity can be adjusted depending on the use of one to six extruders.
AC29/151024E/ATI/M/AS/
3x Volkmann Cabling:
Year: 2017
176 spindles.
AC29/151024E/YPI/M/AS/
1x Superba Heatset:
Type: TVP3
Year: 2017
72 spindles.
Capacity of neumag is 15 tons
Capacity of cabling 10 tons
Capacity of heatset 7.5 tons
Usually factories dont heatset or twist al the yarns that is produced by the Extrusion Lines. If needed later we can give you more Volkmanns. Finding Volkmanns is not hard.
We can do dismantling and loading and packing with good boxes.
Dismantling and loading and good packing like new. 100.000 Eur.
Duration of the works approx 5 weeks.
Crane and forklift is included.
Installation and start up 110.000 Eur.
Duration of the works approx 9 weeks.
For installation and start up, crane and forklift and hotels and flights and foods are not included and are on purchaser's account For installation we will send 4 to 5 technicians and host factory should provide 6 workers to help them.
AB46/011024/AR/
Volkmann VTS – 05C Cabler/Twister
Quantity: 1, Year: 1986, Type 4, 120 spindles, 10” traverse cone, 10” feed package, air threading.
AB46/011024/AR/
Volkmann VTS – 05 Twister
Quantity: 1, Year: 1986, Type 4, 120 spindles, 10” traverse cone, 10” feed package, air threading.