Quantity: 1, Year: 1997, Model: CMI 2S, Blades width: 2200 mm, Arrangement of shearing rollers blades: straight/straight and, via the fabric turner, straight/reverse, Fabric entry: from the plate, Fabric exit: into the plate, Machine suitable for woven and knitting fabrics.

General description:
Different methods of production can be realized, machine is designed for coating on a precisely high coating roller or as an air doctor blade.
Equipped with a collision control system.

Machine consists of:
1. Lower frame and coating head with length, beam and knife adjustment,
2. Coating roller with stripping doctor device (which helps to remove residues from the rear roller)
3. Brake, paste limitation, paste supply, control panel
4. Lacquering device – serves for lacquering the before coated material.
5. Consists of a frame, engraved roller, pressure roller, medium basin and medium limitation.
6. Coating beams adjusted with servo drive controlled via the control panel from which all functions of the machine a centrally controlled.
7. Coating knives: adjustable
8. Mahlo coating thickness verifier system, entry and exit
9. 1 Preheating unit for fabric, run with hot water
10. Heat exchanger & transfer by H.E.A.T. Inc
11. Model KM550-80-483 , 80 Kw, max. temp. 550 F, max. press. 75 psig,
12. Voltage: 480V 60 Hz

Specifications:
Year: 2005
Roller width: 2800 mm.
Coating roller with doctor stripping device
Coating beam equipped with 2 coating knives
Material width: 2600 mm.
Speed: 3-35 m/min.
Burner Capacity: Zone 1 (inlet) 150 Kw, Zones 2-5 100 Kw
Voltage: 3x 480 V AC, +/- 10%
Frequency: 60 Hz
Control Voltage: 24 V DC
Compressed air: 6 bar

Year 1993, 3200mm
EUR 340,000 invested in 2022 for new gas burners,controls,chain and guides.
Hansa Foam Generating Mixer with Turbo Wash – New 2022
A frame feed
12 roller Accumulator
WB Processing Coating head- Knife over roller
Esch – Electrosatic Flock Applicator with 5 hoppers for Rayon
Bruckner 6 bay gas stenter
12 New Gas Burners, controls, chains and guides installed 2022
Web Processing Calendar 2 stainless steel roller.
12 roller Accumulator
Beater Bar with Esch flock extraction
Batching to A frame

Year: 2002, 2000mm
The machine was installed and commissioned in 2023 with over EUR 460,000 invested in 2023 including refurbished burners, new electrical controls, chain guides etc.
Tanks for chemical mixing
Campen Foam Generating Mixer
A frame feed
9 roller Accumulator
Beta Padder 3 bowl (FLC 3TAV 2100)
Mahlo Weft Straigtener (RFMC-10A)
Web Processing Coating Blade -Knife over air
Bruckner 8 Bay Gas Stenter
Pin only, electrical upgrade and new E&L guiders
16 Refurbished Gas Burners and controls
Cooling Zone
Batching to A frame

Quantity: 1, Year: 2017, for knitting and woven fabrics, Model: CMI 100, Rollers Width: 2000 mm, Useful working width: 1800 mm, Fabric Entry from a plate or big roll with Manually Adjusted Fabric Braking Device, Centering Device, Double Motorized Spreader, 1x Shearing knife, Fabric Exit in plate, N.B.: Since the machine is connected to a centralized vacuum system, it does not have an individual dust filtering device.

Quantity: 1, Year: 2007, width 360cm, Double blade, Blade height 19.8mm, Used for towels,bedding and long cut velvet, Can test running.

Villars Powder Coating PPM94 with Chiller,Jenko Powder feed
Engraved roller to apply dot coating
Infra red melt process
Cavitex 2 roller Calibrating Calendar
Hall & Boyden Shrinking roll
Knock brush and extraction unit
NDC Coating Level Scanner
Batching to A frame
Extraction unit
Heizemat Oil Boiler

1800mm, A frame feed, Villars Scatter coater, Infra red pre heat, Caratasch infra red melt process, Calendar rolls stainless steel with water cooling, 2 Cooling cylinders, Batchng to A frame, Secondary A frame Laminating feed, 3 stage processing for coating both sides and lamination, Oil Boiler.

Quantity: 1, Year: 2015 but Only 8’735 working hours, Model CMI200, Number of Shearing heads: 2 heads per machine., Working width: 200 cm, Status: Stopped since Oct 2025 but still in its working position and connected to power. So it can run at any time for inspection and trials.

Quantity: 2, Year: 2008, Model CMI 100, Table width 2200 mm, Coupled to work Front/Front side of the fabric, In very nice conditions, few working hours.

Quantity: 1, Year: 1997, TYPE TAR 2000, ROLLER WIDTH 2.000 MM.

Quantity: 1, Year: 2015, Suitable for terry fabrics, TYPE: OPTIMA TSF – 1T, Working width: 2’400mm, Roller width: 2’500mm, Steaming unit, Dust removal

Quantity: 1, Year: 2018, working width 180cm, double drum, with vacuuming, blade height 17mm, running conditions

Quantity: 1, Year: 2005, Type OPTIMA XS 1, ww. 3400 mm.

QUANTITY: 1, YEAR: 1990, 2.400 MM, POLISHING AND SHEARING MACHINE FOR TOWEL, 20 SHEARING SPIRALS, POL ROTOR.

Quantity: 1
Year 2000, working width 1m80:
– 1 ORION 2001 shearing machine, 1 shearing cylinder
– 1 SIRIUS 87 Thermo-tigering machine, with suction

Quantity: 1, Year: 2014, Working width 260cm, stopped in the mill floor, connected with power.

QUANTITY: 1, YEAR: 1996, WORKING WIDTH 2200 MM, ENTRY WITH MAHLO WEFT STRAIGHTENER TYPE RCMC9, ISOTEX COATING HEAD KNIFE OVER ROLLER KNIFE OVER AIR, WITH TRAVERSING COMPOUND FEED YEAR 2013 TYPE IC 801 AC, BIANCO TWO BOWL FINISHING PADDER, MONTEX STENTER 10 BAYS, GAS HEATED, 10 MAXON BURNERS, TYPE OVEN PACK 415 NAT, 363 KW OUT PUT, HORIZONTAL PIN CHAIN WITH CHAIN CLEANING DEVICE, MAHLO VMC12 PYROMETERS FITTED, YEAR 2004, EXIT WITH COOLING ZONE AND COOLING CYLINDER, BIRCH CRUSH CUT EDGE TRIMMING, EXIT BY BIRCH NON-STOP CENTRE WIND.

QUANTITY: 1, YEAR 1995, WW 3250 MM, MONFORTS STENTER FINISHING & COATING LINE UNWIND FROM A FRAME. DRIVEN ENTRY ROLLERS WITH E+L ENTRY CENTERING/ SCROLL ASSSEMBLY SECTION. 2 DRIVEN SCROLL ROLLER ASSSEMBLY. MONFORTS 2 BOWL VERTICAL IMPREGNATION PAD MANGLE. MAHLOBOW & SKEW WEFT STRAIGHTENER TYPE RFMC 9, COATING HEAD KNIFE OVER DRIVEN ROLLER ADJUSTABLE SIDE DAM ASSY WITH OPERATOR CONTROLBRIDGE. MONDOMIX B50 FOAM GENERATOR. LINKED WITH PERISTALTIC PUMP AND HEADER TANK. ENCLOSED FLOCKING SECTION WITH ELECTROSTATIC UNIT, 3 BRUSH DRIVEN FLOCKING HEADS WITHD ESPENSING, COLLECTION HOPPER WITH DUST EXTRACTION. 7 CHAMBER STENTER TYPE MONTEX TWIN AIR. HORIZONTAL PIN & CLIP CHAIN, THERMAL OIL HEATING. WUMAG TEXROLL SMOOTHING CALENDAR, 130″ WIDE (3300 MM), TOP ROLL CHROME STEAMHEATED, BOTTOM ROLL RUBBER COVERED WITH WATER COOLING SYSTEM, 450 MM ROLLDIAMETER, HYDRAULIC PUMP AND MOTOR FOR PRESSURE. BACKBRUSHING UNIT FLOCK REMOVAL. BATCHARM CENTRE DRIVEN REWIND WITH BOW ROLLER E+L KF20 GUIDERS EDGE & CENTERSLIT – WITH TRIM EXTRACTION FANS.

Quantity: 1, Year: 1998 , table width 2000 mm , double Cylinders with helicoidal blades